If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online.
Job Summary
The Instrumentation, Controls and Electrical (IC&E) Maintenance Technician is responsible for the safe and efficient operation and maintenance of a 1200 MW combined cycle power generation facility utilizing GE 7FA combustion turbines and GE D11 steam turbines (GE Mark VI control systems). Candidate ensures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE.
Job Description
Key Responsibilities:
- Perform routine and emergency maintenance on the plant instrumentation, control, electrical and mechanical systems with minimum supervision, including scheduled shift in addition to weekends and holidays when necessary.
- Provide technical expertise for troubleshooting and resolution of plant instrumentation, control, electrical and mechanical systems issues.
- Inspect, repair, install and remove various types of motors, generators, transformers, switches, circuit breakers, motor control equipment, cabling, buswork and storage batteries, and work with electrical systems up to and including 4160 volts.
- Tune and calibrate boiler controls to ensure safe and optimum boiler performance.
- Calibrate turbine controls and turbine valve actuators for safe and optimum turbine performance.
- Maintain and calibrate all plant instrumentation to provide reliable operational information to operations and support personnel.
- Document and maintain records of instrumentation, control, electrical and mechanical maintenance history.
- Maintains CEMS (Continuous Emissions Monitoring Systems) in accordance with state and federal compliance guidelines.
- Troubleshoot, diagnose and repair plant electronic, pneumatic systems, analyzers, facility computers, process control/PLC equipment and instrumentation.
- Knowledge of power plant mechanical equipment as well as safety policies and procedures, especially in the areas of LOTO, chemical handling, heavy equipment, rotating machinery, confined spaces.
- Experience in the maintenance, repair, and installation of rotating equipment including pumps, mechanical seals, gas and steam turbines, generators, fans, bearings, gaskets, couplings, alignment, etc.).
- Knowledge of heat recovery steam generators and related equipment, piping systems (valves, actuators, flanges, hangers, etc.), and lube oil, analysis, filtration & hydraulic oil systems
- Must be able to locate, trouble-shoot, and adjust defects in mechanical equipment
- Responsible for making sure that electrical and controls P&ID’s are being kept up to date and make revisions where necessary.
- Research and coordinate with vendors and site administrative staff for parts procurement as needed to repair instrumentation and electrical equipment
- Instrumentation and controls involving GE Mark VI control systems, GE RX3i and Allen Bradley PLC systems
- Required to gain a basic operational knowledge of the plant systems and operate the equipment within specifications. Will be able to stand in as a BOP operator if needed
- Responds to unit trips and abnormal operating conditions to maintain plant equipment in a safe operating condition. Responds to emergent situations including call-outs and outages
Experience, Education and Skills:
* Position can be filled at level I, II, III or IV depending on experience and skill.
Desired Qualifications:
- Demonstrated experience maintaining electrical equipment up to 4160 V
- Demonstrated experience maintaining 18 KV and 230 KV electrical equipment preferred.
- Demonstrated experience maintaining, calibrating and troubleshooting of instrumentation, controls preferred.
- Demonstrated experience with combined cycle plant process and equipment is preferred.
- Two year Electrical/Mechanical Technology Degree preferred
- Prior GE 7FA Combustion turbine experience is preferred
- Prior GE D11 Steam turbine experience is preferred
- Demonstrated experience in proper rigging, signaling and crane/hoist operations
- Demonstrated experience in the use of hand tools and standard technical shop test equipment, (powerhouse shop equipment, I&E test instruments, volt/ohm meter, etc.)
- Demonstrated experience in operating electric plant water treatment systems
- Demonstrated experience in mechanical maintenance on all powerhouse equipment such as air compressors, heat exchangers, piping, turbines, valves, etc.
- Demonstrated experience in microprocessor based systems, i.e., distributed control systems, programmable logic controllers, smart relays, smart transmitters, station databases & workstations; as well as computers software such as database, spreadsheet, and word processing programs
Specific Requirements:
- Requires ability to visually read and respond to computer-generated data, instrumentation, gauges, readouts, and variations in color; requires ability to read and comprehend mechanical and electrical drawings specifically P&IDs. Must possess the manual dexterity required to operate keyboards, push buttons, dials, valves, and mechanically actuated devices.
- Must be familiar with appropriate personal protection techniques and safety procedures such as lock out/tag out and personal protective equipment.
- Must pass respiratory physical and wear all required safety equipment when required.
- Must possess team awareness skills and team relationship skills.
Working Conditions:
- Station environment includes but not limited to temperature extremes, high noise levels, dust, fumes, confined space, climbing, lifting, and working around pressurized and energized equipment and tight work spaces
- Overnight travel may include traveling between other stations or for training
- Overtime work will be call-outs, work past or prior to regular schedules and on an "as needed" basis and is routinely required
- Weekend work may be required
- Working hours will be determined by the site management
- Ability to walk, bend, stoop, kneel, push, pull, climb ladders, work in extreme heat or cold, lift up to 50 pounds, walk/work on grating surfaces at extreme heights and work in confined spaces, tight work areas
- Must be able to attend on-site and off-site training
- Must have a valid driver license and be able to operate stations vehicles & heavy equipment
Job Family
Plant Operations
Company
Luminant Generation Company LLC
Locations
Morrisville, PA
Pennsylvania
We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today!
If you currently work for Vistra or its subsidiaries, please apply via the internal career site.
It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws.
If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.
